Feb 15, 2025 Leave a message

What Are The Components Of A Trunnion Mounted Ball Valve?

The fixed ball valve is mainly composed of the following key components:

Valve body
It is the main structure of the fixed ball valve, usually made of high-strength materials such as cast steel or stainless steel to withstand the medium pressure in the pipeline.
The valve body structure is divided into two types: two-piece and three-piece. The valve body of both structures is composed of a middle flange connected by bolts.
Ball
It is the control component of the fixed ball valve. It is a spherical structure with a horizontal channel in the middle. When the ball rotates, it can control the on and off of the medium.
The ball is usually made of materials such as stainless steel or alloy steel to ensure its corrosion resistance and wear resistance.
Valve seat
The component that cooperates with the ball to achieve sealing is usually made of reinforced polytetrafluoroethylene (PTFE) or other wear-resistant and corrosion-resistant materials.
A sealing ring is embedded in the valve seat, and a spring is provided at the tail end of the metal valve seat to ensure sufficient pre-tightening force of the sealing ring to ensure sealing performance.
Valve stem
The component that connects the handle (or other drive device) and the ball, and drives the ball to rotate by rotating the valve stem.
There is usually a spiral groove on the valve stem, which can control the up and down movement and horizontal rotation of the valve core in conjunction with the valve stem guide pin.
Both the upper and lower valve stems are equipped with PTFE bearings to reduce friction and save effort in operation.
Stem guide pin
Cooperates with the valve stem to control the movement and rotation direction of the valve core (ball) to ensure that the valve core can only move along the predetermined trajectory.
Bonnet
A component covering the upper part of the valve body, used to protect internal components such as the valve stem and ball from the influence of the external environment.
Handwheel (or other drive device):
A component used to manually rotate the valve stem, usually located on the upper part of the valve body. In addition, the drive mode of the fixed ball valve can also be worm gear drive, pneumatic or electric.
Sealing packing
A component filled between the valve stem and the valve cover to prevent the medium from leaking from the valve stem.
Drain hole
Set at the upper and lower parts of the valve body, used to check whether the valve seat is leaking, and to discharge the retained materials in the middle cavity to reduce the contamination of the valve by the medium.
In addition, the trunnion mounted ball valve may also include other auxiliary components, such as adjustment plates (used to ensure the contact position between the ball and the sealing ring), fireproof sealing rings (used to prevent sudden heat or fire from burning the sealing ring), etc. These components work together to ensure that the trunnion mounted ball valve can operate stably under various working conditions.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry