Ball Valve Floating
video

Ball Valve Floating

Side-entry floating ball valves are manufactured in accordance with API 6D. The valve is configured in a forged bolted two-piece split-body design with a small diameter, suitable for medium/low pressure working conditions. Characterized by simple design, the valve seats are directly inserted into the body.
Send Inquiry
Product Introduction

Side-entry floating ball valves are manufactured in accordance with API 6D. The valve is configured in a forged bolted two-piece split-body design with a small diameter, suitable for medium/low pressure working conditions. Characterized by simple design, the valve seats are directly inserted into the body.
The upstream flow pressure pushes the free-floating ball against the downstream seat-the resulting compression provides a perfect leak-free sealing solution.
The stem is connected at the top of the ball and allowing the valve to open and close with a quarter-turn movement.
Material selection is fully customizable to meet the customer's project specifications and several unique features are available offering an enhanced technical solution suitable for aggressive offshore environment and corrosive and abrasive fluids.

 

VALVE DESIGN

Based on API 6D

 

TEMPERATURE RANGE

-150 to 662°F (-101 to 350°C)

 

SIZE

NPS 1/2-6 (DN 15-150)

 

PRESSURE RATING

ASME 150 - ASME 2500

 

FACE-TO-FACE

As per API 6D standard

 

END CONNECTIONS

RF, RTJ as per B16.5 &B16.47
SW, Socket Welded as per B16.11

 

BODY DESIGN

Forged/casting bolted two-piece

 

SEAT DESIGN

Soft or metal seated with Hardfacing on ball and seats

 

FEATURES

Secondary seals in pure Graphite
Anti-Static Device
Anti Blow out stem
Bi-directional tight shut-off
Low fugitive emission stem packing available
O-ring /Lip seals and Graphite configuration

 

OPERATOR

Manual: wrench or Gear with padlocking

 

TESTING & CERTIFICATIONS

Compliance with API 6D & ISO 5208 & API 598 inspection and testing
Fire safe and fire tested as per API 6FA/ 607
SIL 3 Certification as per IEC61508
Fugitive Emission as per ISO15848
PED 2014/68/UE

 

How to overcome the disadvantages of floating ball valves?

To overcome the disadvantages of floating ball valves, the following measures can be taken:

Material selection:

Select high temperature, high pressure and wear-resistant materials to manufacture the ball, valve seat and sealing ring to improve the working performance and durability of the floating ball valve in high temperature and high pressure environments.

 

Structural optimization:

The structure of the floating ball valve is optimized to reduce the friction between the ball and the valve seat and reduce wear. For example, the surface treatment technology of the ball can be improved, such as using wear-resistant coatings or special lubricating materials.

 

Improve operation and maintenance methods:

Strengthen the training of operators, improve operating skills and accuracy, and reduce valve damage caused by misoperation. At the same time, regularly maintain and inspect the floating ball valve to promptly discover and deal with potential problems.

 

Increase sealing:

Improve the sealing performance of the floating ball valve by improving the sealing structure, such as using elastic seals or increasing the contact area of ​​the sealing surface. In addition, consider using a double sealing structure or a sealing gasket to enhance the sealing effect.

 

Reasonable selection:

Select the appropriate floating ball valve model and specification according to the actual application scenario and needs. Avoid choosing valves that are too large or too small to reduce the working medium load and flow resistance of the ball.

 

Install auxiliary equipment:

In application scenarios where noise reduction or pollution prevention is required, auxiliary equipment such as mufflers or filters can be installed to reduce noise and pollution.

 

Adopt new technologies:

Introduce new technologies such as electric or pneumatic operating mechanisms to reduce the burden of manual operation and improve the convenience and accuracy of operation. In addition, advanced monitoring and diagnostic technologies can be used to detect the working status of the valve in real time, and potential problems can be discovered and handled in a timely manner.

 

Develop a maintenance plan:

Develop a detailed maintenance plan, including regular cleaning, inspection and replacement of worn parts, to ensure the long-term performance of the floating ball valve.

Through the implementation of the above measures, the shortcomings of the floating ball valve can be effectively overcome and its performance and reliability in various application scenarios can be improved. However, due to the different specific needs and conditions of each application scenario, it is necessary to select appropriate measures to overcome the shortcomings of the floating ball valve according to the actual situation.

 

Hot Tags: ball valve floating, China ball valve floating manufacturers, suppliers, threaded ball valve, forged steel floating ball valve, extended bonnet ball valve, marine floating ball valve, stainless steel floating ball valve, api 608 ball valve

Send Inquiry

whatsapp

Phone

E-mail

Inquiry