Sanitary Tri-Clamp Three Piece Ball Valve
Sanitary Tri-Clamp Three-Piece Ball Valve
The Sanitary Tri-Clamp Three-Piece Ball Valve provides quarter-turn on/off flow control for sanitary process piping. Its three-piece body facilitates access to internal components for inspection and maintenance, while clamp connections support convenient assembly and disassembly.
Product Overview
Three-Piece Body: Allows access to the ball, seats, and seals for servicing.
Tri-Clamp Connections: Connect to compatible sanitary ferrules and gaskets.
Stainless Steel Construction: Available in 316 or 316L, subject to configuration.
Flexible Operation: Manual, pneumatic, or electric actuation options, subject to availability.
Technical Specifications
|
Parameter |
Specification |
|
Valve Type |
Sanitary three-piece ball valve |
|
Body Material |
SS316 / SS316L |
|
Size Range |
1/2"–4" (DN15–DN100), subject to availability |
|
End Connections |
Tri-Clamp; specify connection standard and dimensions |
|
Port Design |
Full port, subject to model confirmation |
|
Seat Materials |
PTFE, TFM, EPDM, FKM, or silicone, subject to availability |
|
Surface Finish |
Standard or polished options; specify required Ra value |
|
Working Pressure |
Confirm by size and configuration |
|
Working Temperature |
Depends on seat material and operating conditions |
|
Operation |
Manual / pneumatic / electric, subject to configuration |
|
Documentation |
Material certificates and test reports, subject to agreement |
Applications & Configuration
Food & Beverage: On/off isolation in liquid ingredient, dairy, and beverage transfer lines.
Pharmaceutical & Bioprocessing: For process systems requiring defined wetted materials, surface finish, and cleaning procedures.
Cosmetics & Personal Care: For fluid transfer where seal compatibility and cleaning requirements must be evaluated.
Configuration Options
- Connection Standard: Specify tube outside diameter (OD), ferrule dimensions, and the required dimensional standard.
- Seat Selection: Choose a suitable seat material based on the process medium, temperature, and cleaning chemicals.
- Hygienic Requirements: Specify internal surface roughness, cavity-filler requirements, and CIP/SIP conditions.
- Actuation: Select manual or automated operation according to operating frequency and control requirements.
Manufacturing & Quality Control
Material Verification: Material identification and EN 10204 3.1 certificates can be specified where available.
Dimensional Inspection: Connection dimensions and critical features are checked against approved drawings.
Pressure & Leakage Testing: Test procedures and acceptance criteria should be confirmed against the agreed specification.
Export Packaging: Protective end caps, individual bagging, and additional packaging can be specified according to shipping requirements.
Customization & RFQ Requirements
For an accurate quotation, please provide:
Product Details: Valve size, quantity, port design, and body material.
Connection Requirements: Tube OD, ferrule dimensions, and connection standard.
Operating Conditions: Process medium, working pressure, temperature, and CIP/SIP parameters.
Compliance & Finish: Required surface Ra, seat material, material certificates, and applicable compliance documentation.
Operation & Delivery: Manual or automated actuation, actuator requirements, packaging, and destination.
Frequently Asked Questions
Q: Does a Tri-Clamp connection make a ball valve suitable for hygienic service?
A: Not by itself. Hygienic suitability also depends on internal geometry, surface finish, drainability, seal compatibility, and cleaning requirements.
Q: When should I choose cavity-filler seats?
A: Consider cavity-filler seats when reducing product retention around the ball is important. Confirm the specific seat design and its suitability for the process and cleaning conditions.
Q: Should I choose 316 or 316L stainless steel?
A: 316L has a lower carbon content and is often selected for applications involving welding or specific corrosion-control requirements. The appropriate grade depends on the process medium and project specification.
Q: Can the valve be fitted with a pneumatic or electric actuator?
A: Actuation may be available depending on the model. Confirm the mounting interface, operating torque, actuator sizing, and control requirements.
Q: How do I confirm Tri-Clamp compatibility?
A: Provide the tube outside diameter, ferrule dimensions, and applicable connection standard. Nominal size alone may not confirm dimensional compatibility.
Hot Tags: sanitary tri-clamp three piece ball valve, China sanitary tri-clamp three piece ball valve manufacturers, suppliers
You Might Also Like
Send Inquiry