Ball valve maintenance first needs to remove the valve in the pipeline, then purge the valve, and then press the valve, use foam water to check the location of the specific valve leakage, and then prepare the welding machine, welding consumables, welding personnel, flaw detection personnel, repair welding of the valve leakage, and then take pictures after the repair welding.
If it is a problem at the spacer, the bolt should be tightened evenly and symmetrically, and a torque wrench should be used if necessary. There should be a certain preload clearance at the flange connection; The gasket assembly should be in the middle of the alignment, the force is uniform, the gasket is not allowed to lap and use double gaskets; Attention should be paid to cleaning when installing the gasket, the sealing surface should be cleaned with kerosene, and the gasket should not fall to the ground.
If the sealing surface needs to be repaired, when the sealing surface is grinding, grinding tools, abrasives, abrasive cloth and sandpaper and other objects should be selected reasonably, the grinding method should be correct, the coloring inspection should be carried out after grinding, and the sealing surface should be free of indentations, cracks, scratches and other defects; The surfacing and heat treatment processes should meet the technical requirements of the regulations and specifications, and the sealing surface should be accepted after processing, and no defects that affect the use are allowed.
May 11, 2024
Leave a message
Maintenance method of ball valve
Previous
Selection of ball valve materialSend Inquiry





